LED 光療抗痘藍光面膜儀
Clear spots and calm skin with red and blue light therapy
- 我們接受:
Delivery Methods
驚喜優惠:購買即送 CurrentBody Skin 水凝膠面膜3片裝(價值$246)
60 天退款保證
對於改變主意的退貨,您的物品必須是未使用過的,並且與您收到時的狀態相同。物品也必須在原包裝中,所有封條完好無損。
退款保證:如果在60天內您對物品不完全滿意,可以退回物品並獲得退款,但需扣除百分之十的重新進貨費用。
兩年保修:如果您的物品在六個月內證明有故障,您有資格獲得全額退款,我們還會支付退貨費用。如果您的物品在六個月後證明有故障,您有資格獲得商店積分或更換貨品。
產品特點
- Fast results, 90% clearer skin in 2 weeks
- Combined red and blue light treatment, 36% more effective than blue light alone
- Eliminates bacteria and breakouts
- Calms redness and inflammation
- Treats mild to moderate acne in just 10 minutes
- FDA-cleared
- 60 天退款保證 不完全滿意? 了解更多
COMPLETE ACNE SOLUTION
Your skin deserves a break, not breakouts
The CurrentBody Skin Anti-Blemish LED Face Mask uses red and blue light therapy for a complete anti-acne solution.
This combination is clinically proven to be 36% more effective at treating acne than blue light alone.
Genuine Results
Select a benefit to reveal genuine customer results:
The benefits
Our Anti-Blemish LED Face Mask combines red and blue light therapy to target every stage of acne—from the bacteria that causes breakouts, to the inflammation and redness they leave behind.
It’s a comprehensive approach to not just fight acne, but to control it.
Use the mask for 10 minutes, 3 to 5 days a week, across 6 weeks for clearer, smoother skin.
The science
This mask uses low-level light therapy (LLLT) to treat acne with blue (415nm) and red (633nm) LED light; clinically proven to be more effective than blue light alone.
132 LED lights are spread evenly across the face, diffused with patented pillow technology so you never miss a spot.
The optimal balance of power intensity (44mW/cm²) delivers precise (+/- 2nm) wavelengths to your skin in 10 minutes, for maximum benefit to your skin.
解答您的問題
我們的內部美容專家回答您最常見的問題。
Step 1: Conduct a sensitivity test.
Step 2: Cleanse and dry your skin. Attach the mask securely around your head and adjust the straps comfortably.
Step 3: Switch on, then sit back and relax for your 10-minute light therapy session.
Step 4: Remove the mask from your head, wipe clean and safely store.
Step 5: Continue with the rest of your skincare routine.
We recommend using the device 3 to 5 times for 6 weeks to see best results. After 6 weeks of consecutive use, give your skin a short break of 1 to 2 weeks before resuming for another 6-week rotation.
Yes. It’s important to limit exposure to blue LED light, we recommend using the provided protective goggle inserts for the duration of your light therapy session.
Blemishes refer to imperfections on the skin, such as discolouration, spots or marks, caused by various factors like hormonal changes, genetics, stress, skincare, diet and environment.
Our Anti-Blemish LED Face Mask targets mild to moderate acne, pimples, whiteheads and small cysts or nodules. However, it's not effective for treating pockmarks or indentations from previous spots, nor is it recommended for those with a history of melasma. If you have severe acne, please consult your doctor.
Please consult your healthcare professional for advice. See our chart here for more information.
Blue light therapy gets absorbed by the cells on the skin’s surface, specifically targeting acne-causing bacteria (p. acnes).
Red light therapy works below the skin’s surface to lower inflammation, soothe redness for a brighter, clearer skin tone.
Clogged hair follicles due to excess oil, dead skin cells, dirt, or makeup can cause blemishes, while hormonal changes can increase oil production, leading to pore blockage.
And while stress alone doesn’t cause blemishes, it can aggravate the symptoms.
Certain skincare and makeup can block the LED light from entering the skin. We recommend using the LED mask on clean, product free skin.
The device is 100% pain free. It does not get hot and should not feel uncomfortable.
6 to 8 hours for a full charge.
Wipe down the transparent side of the LED face mask with water-based wipes or a damp, lint free cloth. Stubborn stains can be gently removed with 70% rubbing alcohol. We recommend cleaning your mask before every use to keep it fresh.
This mask uses red (633nm) and blue (415nm) LED wavelengths at the same time. When these two colours mix, they show as a purple pink light.
Test yourself for light sensitivity prior to using:
1. Check the list of contraindications to ensure you are not using any skincare which cause photosensitivity or taking any medications (oral or topical) which cause photosensitivity reactions.
2. Ensure your skin is clean and dry.
3. Place your LED product in contact with the skin. Ideally inner thigh, arm or back of hand.
4. Turn your device on and complete a full treatment.
5. Please note if at any time you experience heat or discomfort stop your treatment immediately.
6. After 24 hours, if there are no reactions, carry out the treatment protocol indicated for your device.
7. If you experience any reactions please contact our customer support team.
Power Input: 100-240Vac / 50-60Hz
Power Output: 5.0V-1.0A
Product Weight: 350g
Dimensions: W 429mm x L 197mm x H 5mm
Wavelengths: Red (633nm), blue (415nm)
Power Source: Lithium Ion Battery
Power Density: 30mW/cm²
Number of LED’s: 66 red (633nm) diodes and 66 blue (415nm) diodes
Operating Environment Temperature: 10-35˚C
Operating Environment Humidity: 30-80%RHStorage Environment Temperature: 20-60˚C
Storage Environment Humidity: 30-90%RH
This appliance must not be used by children aged 12 or under.
People aged between 13 and 18 must always use the appliance under adult supervision.
Please consult your doctor before use if you are, or suspect you are pregnant or breastfeeding.
Please consult your doctor before use if you have, or suspect you have, cancer.
DO NOT use the device if it is wet. If the device has been dropped in water, you must first unplug it before touching it.
Blue light is harmful to the eyes, so always make sure that the glasses are correctly fitted ensuring no light is projected into the eyes when using the device.
DO NOT use if your skin is red or inflamed due to a previous treatment.
DO NOT use the device to treat skin that is painful to the touch, raised (higher than the surrounding skin), crusted or bleeding. This may be a sign of a more serious condition and should be investigated by your doctor.
No modification of this equipment is permitted.
STOP using the device and consult your healthcare provider if you have an adverse reaction to the use of the device.
STOP your treatment if it feels hot or if your skin feels uncomfortably warm.
DO NOT use the device on unpigmented spots or areas of skin affected by vitiligo.
DO NOT open if you have had recent surgery/other surgical procedures or if you have a bacterial infection, as this may lead to worsening of symptoms.
DO NOT use or store the device near hot surfaces, in direct sunlight or where the temperature exceeds 100F, as this may damage the plastic coating of the device.
DO NOT use solvents or abrasive cleaners on the appliance.
DO NOT use the appliance in any way other than that specified in the User Manual.
DO NOT use the device with a USB-C cable other than the one supplied by CurrentBody. The device must only be used with the USB cable supplied. If any part of the main adapter or cable is damaged, discontinue use and contact CurrentBody.
DO NOT scratch the light-emitting surface.Ask your doctor before use if:
You are taking any prescription or over-the-counter medicines known to cause light sensitivity. You can find more information and a list of drugs that can cause light sensitivity here.
Have suspicious or cancerous lesions.
Have photosensitive disorders or genetic eye diseases.
Do not use the device on areas with phlebitis, thrombophlebi-tis and varicose veins or if you have a medical history of light-triggered seizures or epilepsy.
Skincare which treats causes of and active acne are contraindicated against for use with this device:
Contraindicated Skincare: salicylic acid, AHA and BHA exfoliants, glycolic acid, fruit acids, retinoids, hydroquinone, retinol, benzoyl peroxide, along with any other skincare which causes sensitivity to the sun or photosensitive/phototoxic reactions.
Medications which are known to cause photosensitivity (only most common). Please check with your doctor if you are unsure if it will cause a photosensitive reaction.
Contraindicated Medications: Antibiotics; particularly those for treating skin conditions, or roaccutane; do not use within 6 months, steroids, topical or injectables. If you've had injections, you will need to wait 3 months before using LED, diuretics and St John’s Wort.
Other contraindicated ingredients include coal tar, deodorants, antibacterial soaps, artificial sweeteners, naphthalene (moth balls), petroleum products, brightening agents found in laundry detergents and cadmium sulphide (a chemical injected into the skin during tattooing).Contraindicated medications: antibiotics - particularly those for treating skin conditions, isotretinoin or roaccutane - use within 6 months, steroids, topical or injectables - If customer has had injections they will need to wait 3 months before they can use LED, diuretics and St John’s Wort.
Other contraindicated ingredients include coal tar, deodorants, antibacterial soaps, artificial sweeteners, naphthalene (moth balls), petroleum products, brightening agents found in laundry detergents, and cadmium sulfide (a chemical injected into the skin during tattooing).需要幫助嗎?
我們友好的專家隨時為您提供幫助,幫您找到理想的美容設備。
閱讀更多 CurrentBody Skin
查看更多產品
最近瀏覽過的
購買您最近瀏覽過的商品。